2023-06-28

Several aspects that need attention during the use of the cutting wheel

　　Cutting wheel is a common cutting tool, widely used in metal processing, building construction, automobile maintenance and other fields. Proper use and precautions are essential to ensure its safety and performance. The following will describe several aspects to be aware of during its use.

　　1, choose the appropriate product: according to the type of cutting materials and work requirements to choose the right product. Different products are suitable for different materials, such as metal, concrete or brick. Ensure product specifications, dimensions and speed parameters match the job requirements.

　　2, installation and inspection: Before installing the cutting wheel, ensure that the cutting machine or tool is turned off and follow the correct installation steps. Inspect the product for cracks, wear, or other damage and make sure the product matches the equipment. Damaged or mismatched products can cause dangerous conditions to occur.

　　3, maintain a safe distance: when in use, to ensure that there are no other people or objects in the surrounding area. Keep a safe distance to avoid injuring others or damaging surrounding equipment.

　　4, the use of personal protective equipment: the product will produce high-speed rotating cutting debris and dust, so you must wear appropriate personal protective equipment, such as goggles, ear plugs, protective gloves and dust masks. These devices protect the eyes, ears, hands and respiratory system, reducing the risk of injury.

　　5, control speed and pressure: in the cutting process, the rotation speed of the product should be controlled and the pressure applied. Excessive speed and pressure can cause product damage, fragmentation or overheating, increasing the risk of accidents. Speed and pressure should be controlled according to the nature of the material and the recommended conditions of use of the product.

　　6, regular inspection: During use, regularly check the wear and damage of the cutting wheel. If the cutting wheel surface cracks, serious wear or other damage, should be replaced in time. Using worn or damaged products can result in inaccurate, dangerous cutting or provide inefficient cutting results.

　　7, avoid overuse and overheating: in the continuous use of products, attention should be paid to avoid overuse and overheating. Overuse can cause the product to overheat, reducing its life and increasing the risk of accidents. After prolonged use, the product should be allowed to cool and rotated as needed.

　　8, avoid side force and side effects: in the cutting process, avoid applying too much side force or side force. Excessive lateral forces can cause the product to deviate from the predetermined cutting line, resulting in inaccurate cutting. Side forces refer to the additional forces generated during the cutting process, such as vibration and jitter, which may cause damage to the product or unsatisfactory cutting results. Care should be taken to maintain stable operation and appropriate cutting techniques.

　　9, proper storage and storage: when the cutting wheel is not used, it should be properly kept and stored. The product should be placed in a dry, clean, extrusion and stress free area. Avoid moisture, exposure to high temperatures or corrosive environments. Proper storage can extend the service life of the product and ensure its performance.

　　When using the cutting wheel, it is necessary to take care to select the appropriate product, install and check the state of the cutting wheel, maintain a safe distance and use personal protective equipment. At the same time, control the speed and pressure of the product, check the wear situation regularly, and avoid overuse and overheating. Pay attention to avoid excessive side force and side force, and properly keep and store the product. Adherence to these precautions can ensure the safe use of the product, improve work efficiency, and extend the life of the product.